5005 Aluminium Coil

5005 Aluminum Alloy Introduction

5005 Aluminium Coil is a non-heat treatable alloy that is widely used in various industries due to its combination of good properties. The alloy is a member of the 5xxx series of aluminum alloys, which contain magnesium as the primary alloying element.

5005 Aluminum Alloy Chemical Composition

Elements	Mg	Mn	Zn	Cu	Si	Cr	Fe	Others	Al
Content	0.5～1.1	0.2	0.2	0.2	0.3	0.1	0.7	0.05	Remain

Typical Mechanical Properties Of 5005 Aluminum Alloy

• Tensile Strength: The tensile strength of 5005 aluminum alloy ranges from 145-185 MPa (21,000-27,000 psi), depending on the temper.
• Yield Strength: The yield strength of 5005 aluminum alloy ranges from 80-135 MPa (12,000-20,000 psi), depending on the temper.
• Elongation: The elongation of 5005 aluminum alloy ranges from 1-20%, depending on the temper.
• Hardness: The Brinell hardness of 5005 aluminum alloy is typically in the range of 47-63 HB, depending on the temper.

Applications Of 5005 Aluminum Alloy

• Building and Construction: Commonly used in building and construction applications due to its good corrosion resistance and formability. It is used for gutters, siding, roofing, and other exterior applications.
• Transportation: Used in the transportation industry for various applications, including truck and trailer bodies, fuel tanks, and bus and train bodies. Its corrosion resistance and formability make it a good choice for these applications.
• Electrical and Electronics: Used in electrical and electronics applications, such as casings for electronic equipment and heat sinks for computer components. Its good thermal conductivity and ease of fabrication make it a suitable choice for these applications.
• General Sheet Metal Work: Used for general sheet metal work due to its good formability and weldability. It is used for a variety of applications, including food and chemical processing equipment, storage tanks, and pressure vessels.
• Anodizing: 5005 Often used for anodizing applications due to its ability to take on a wide range of colors and finishes. It is used for architectural and decorative applications, such as door and window frames, and for signage and display purposes.

5005 Aluminum Alloy Features

• Corrosion Resistance: Good corrosion resistance, making it suitable for applications in marine and chemical environments.
• Formability: Excellent formability, allowing it to be easily formed into various shapes without cracking or tearing. This makes it an ideal choice for applications that require complex shapes, such as sheet metal work, appliances, and signage.
• Weldability: Easily weldable, making it suitable for a wide range of applications that require welding. It can be welded using various methods, including TIG, MIG, and resistance welding.
• Moderate Strength: Moderate strength, making it suitable for applications where both strength and light weight are important. The strength of the alloy can be increased through cold working and strain hardening.
• Anodizing: 5005 aluminum alloy is anodizable, meaning it can be treated with an anodizing process to enhance its corrosion resistance and durability. Anodizing can also improve the appearance of the alloy.
• Cost-effective: Cost-effective choice for many applications due to its combination of good properties and relatively low cost compared to other high-performance aluminum alloys.

5005 Aluminum Alloy Market Analysis

The market for 5005 Aluminium Coil is expected to grow in the coming years, driven by its wide range of applications and good properties. It is a cost-effective choice for many applications, with its good properties and relatively low cost compared to other high-performance aluminum alloys. The market for 5005 aluminum alloy is expected to grow due to its versatile and cost-effective properties, making it a suitable choice for many industries and applications.

Product Name	5005 Alloy aluminum Coil
Production Standard	ASTM, B209, JIS H4000-2006,GB/T2040-2012,etc
Width	50mm-2500mm or as the customer’s request
Longth	50mm-8000mm or as the customer’s request
Thickness	0.12mm-260mm
Surface	Coated, Embossed,Brushed, polished, Anodized,etc
OEM service	Perforated, Cutting special size, Doing flatness, Surface treatment,etc
Payterm	Ex-work, FOB, CIF , CFR, etc
Payment	T/T, L/C, Western Union, etc
Delivery Time	Within 3 days for our stock size,15-20days for our production
Package	Export standard package: bundled wooden box, suit for all kinds of transport,
	or be required
MOQ	1ton
Sample	Free and available
Quality	Certificate of Test,JB/T9001C,ISO9001,SGS,TVE
Application	Construction filed, Ships building industry, Decoration, Industry,Manufacture,Machinery and hardware fields, etc